Autoclaves
-
Details
The Tuttnauer manual autoclave is designed to compliment any healthcare facility. The bright new easy to use panel was designed with the operator in mind. Our 2340M autoclave will satisfy all of your sterilization needs without compromising on quality, safety or reliability.
- Automatic shut off at the end of both the sterilization and dry cycles.
- A long life electro polished chamber and door.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
- Dual safety thermostat to protect against overheating.
- International certifications.
- 1 year parts and labor warranty.
-
Details
The Tuttnauer manual autoclave is designed to compliment any healthcare facility. The bright new easy to use panel was designed with the operator in mind.
- Automatic shut off at the end of both the sterilization and dry cycles.
- A long life electro polished chamber and door.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
- Dual safety thermostat to protect against overheating.
- International certifications.
- 1 year parts and labor warranty.
-
Details
The Tuttnauer M Series is also available in a quick cycle model, the Kwiklave (MK). This sterilizer offers all the proven, dependable features of our manual autoclave, with the added benefit of reducing the total heat up time. This autoclave is the perfect choice for quick instrument turn-around or a high volume office. Speed and reliability are accomplished without sacrificing load size. 1 year parts and labor warranty.
Model 2540MK requires a voltage between 220V and 235V for proper operation. When applicable a buck/boost transformer (0.5kVA) may be required.
- Automatic shut off at the end of both the sterilization and dry cycles.
- A long life electro polished chamber and door.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
- Dual safety thermostat to protect against overheating.
- International certifications.
- 1 year parts and labor warranty.
-
Details
Our largest automatic table top autoclave. Features a closed door active drying system. Perfect for multi-doctor practices, clinics or surgery centers. 15″x 30″ chamber accommodates longer instruments or a large number of small instruments. Capacity for 15 full size IMS cassettes. 2 year parts and labor warranty.
- Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches
- Hepa filter 0.2 µm air filter (replaceable)
- Rapid cycles optimize the availability of ready-to-use sterile instruments
- Easy-to-use, single touch control system increases productivity
- 3 Pre-set sterilization programs
- Program and customize cycle parameters to suit your needs and maximize flexibility
- Integrated printer for cycle documentation (optional)
- Interdependent temperature and pressure monitoring
- Cycle information recovery in the case of power failure or cycle interruption
- Insufficient water detector with automatic shut-off
- Supplied with a 3 shelf stand (30”Wx36”Dx34”H)
-
Details
Our largest manual table top autoclave. Perfect for multi-doctor practices, clinics or surgery centers. 15” x 30” chamber accommodates longer instruments or a large number of small instruments. Capacity for 15 full size IMS cassettes. 1 year parts and labor warranty.
- Automatic shut off at the end of both the sterilization and dry cycles
- A long life electro polished chamber and door
- Double safety locking device prevents door from opening while chamber is pressurized
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir
- Dual safety thermostat to protect against overheating
- International certifications
- Supplied with a 3 shelf stand (30”Wx36”Dx34”H)
- 1 year parts and labor warranty
-
Details
With the simplicity of one touch design all your sterilization and drying needs are fulfilled. The Tuttnauer EZ10 fully automatic autoclave will fill, sterilize, exhaust and dry at the touch of a button.
- Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches.
- High efficiency air pump circulates hot air after the sterilization cycle for fast drying.
- Hepa filter 0.2 µm air filter (replaceable).
- Pre-loaded cycles for: unwrapped instruments, wrapped/packs, glassware and additional drying cycle.
- All program parameters can be customized and stored.
- Automatic shut off at the end of both the sterilization and dry cycles.
- Audible and visual cycle interruption alert.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir.
- Constant monitoring of temperature and pressure for sterilization.
- Power outage recovery system.
- Door design prevents steam from coming in contact with control panel.
- Optional internal printer documents: date, time, temperature and pressure.
- 510k clearance for dental handpieces.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
- International certifications.
- 2 year parts and labor warranty.
-
Details
The Tuttnauer EZ series is also available in a quick cycle model, the Kwiklave (EZ10k). This sterilizer offers all the proven, dependable features of our fully automatic autoclaves, with the added benefit of reducing the total heat up time. This autoclave is the perfect choice for quick instrument turn-around or a high volume office. Speed and reliability are accomplished without sacrificing load size. 2 year parts and labor warranty.
Model EZ10k requires a voltage between 220V and 235V for proper operation.
When applicable a buck/boost transformer (0.5KVA) may be required.
-
Details
With the simplicity of one touch design all your sterilization and drying needs are fulfilled. The Tuttnauer EZ9 fully automatic autoclave will fill, sterilize, exhaust and dry at the touch of a button.
- Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches.
- High efficiency air pump circulates hot air after the sterilization cycle for fast drying.
- Hepa filter 0.2 µm air filter (replaceable).
- Pre-loaded cycles for: unwrapped instruments, wrapped/packs, glassware and additional drying cycle.
- All program parameters can be customized and stored.
- Automatic shut off at the end of both the sterilization and dry cycles.
- Audible and visual cycle interruption alert.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir.
- Constant monitoring of temperature and pressure for sterilization.
- Power outage recovery system.
- Door design prevents steam from coming in contact with control panel.
- Optional internal printer documents: date, time, temperature and pressure.
- 510k clearance for dental handpieces.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
- International certifications.
- 2 year parts and labor warranty.
Brochure
